Oil production offshore U.S. Gulf of Mexico nearly 30% shut-in as Hurricane Helene progresses
by World Oil
click here to read this article at WorldOil.com
*this article was not written by Roseland Oil & Gas
(WO) — The Bureau of Safety and Environmental Enforcement (BSEE) has activated its Hurricane Response Team and is monitoring offshore oil and gas operators in the Gulf of Mexico as they evacuate platforms and rigs in response to the developing Hurricane Helene.
Based on data from offshore operator reports submitted as of 11:30 a.m. on Sept. 25, personnel have been evacuated from a total of 17 production platforms, 4.58% of the 371 manned platforms in the Gulf of Mexico.
Personnel have been evacuated from one non-dynamically positioned (DP) rig, equivalent to 20% of the five rigs of this type currently operating in the Gulf. Rigs can include several types of offshore drilling facilities including jackup rigs, platform rigs, all submersibles, and moored semisubmersibles.
A total of three DP rigs have moved off location out of the storm’s path as a precaution. This number represents 14.3% of the 21 DP rigs currently operating in the Gulf.
DP rigs maintain their location while conducting well operations by using thrusters and propellers; these rigs are not moored to the seafloor, so they can move out of harm’s way in a relatively short time frame. Personnel remain on board and return to the original location once the storm has passed.
From operator reports, BSEE estimates that approximately 29.18% of the current oil production and 16.85% of the current natural gas production in the Gulf of Mexico has been shut-in.
As part of the evacuation process, personnel activate the applicable shut-in procedure, which can frequently be accomplished from a remote location. This involves closing safety valves located below the surface of the ocean floor to prevent the release of oil or gas, effectively shutting in production from wells in the Gulf and protecting the marine and coastal environments. Shutting in oil and gas production is a standard procedure conducted by industry for safety and environmental reasons.
by World Oil
click here to read this article at WorldOil.com
*this article was not written by Roseland Oil & Gas